You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4755 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Sunday, June 12th 2005, 6:55pm

by RidgeRun05

Yep, two totally different flow rates. You should keep rotors, sprays, and drip irrigation all on seperate zones.

Sunday, June 12th 2005, 6:09am

by Wet_Boots

Use sprays for everything. They make small and special pattern nozzles.

Sunday, June 12th 2005, 5:17am

by aseidman

Mixing Drip Hose and sprinkler heads on one zone

I Have someone istalling a system for my home. Its a 4 zone system with only a few sprinkler heads per zone to keep the pressure up. MY home provides about 50-60 PSI of water.

On the side of my home (10 feet by 50 feet) we have a few small heads spraying water. Can we end the zone by transitioning to a drip hose ? Will it cause the pressure to drop any more than a spray head ? The drip hose would abe about 15 ft long running through a flower garden. If I can not use the drip hoe, we will be forced to have a raised head just for the garden and this head will water a lot more than the garden.

So.. can we mix the spray heads and drip hose ?