You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4747 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Friday, May 27th 2005, 5:07pm

by RidgeRun05

Why is it that the only way for you to install an irrigation system is to tap into the hose bib? I would suggest if you are going to invest the money in a sprinkler system, that you plan it properly and install it correctly. Installing your system off of a 1/2" hose bib will cause you more problems than just being able to have two or three heads on a zone.

Friday, May 27th 2005, 2:57pm

by joeblow

The only way

The only option I have is to tap into the hose bib, and the flow rate is insufficient. Is there any way to make the system work without reducing the zones to two or three heads?