You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1593 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Saturday, June 7th 2014, 8:53am

by Wet_Boots

Service the valve feeding the under-performing zone.

Friday, June 6th 2014, 3:57pm

by crwiseman

Suddenly, super low pressure in one lawn circuit?

About a 10 year old pop-up sprinkler installation in a lawn, 2 valves each control 1/2 of the lawn, been working fine forever. All of a sudden, one side of the lawns sprinklers ALL barely have pressure? I flushed all the sprinklers by unscrewing the ends and running water through them but the water flow even with the heads off seemed low? Is there a way I could pull apart the control valve inside the manifold box to see if something is jamming it up in there or?

There are three valves in the control box running off the same water line on a 3 way manifold, never have had a problem since installation. Don't see any obvious leakage or wet spots between valves and lawn . . . any ideas?