You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4373 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Sunday, April 28th 2002, 1:56pm

by SprinklerWarehouse Irriga

Scott,

It sounds like you may have black poly pipe as your piping with a hole in it. If so, turn off the water to the pipe, cut the pipe in half at the hole. Use an insert coupling to connect the pipe back together. Here is a link to our insert couplings page:
http://www.sprinklerwarehouse.com/shop3/MiscFittingsPoly_FittingsCouplings.html

If you have white PVC piping use a quik-fix to repair the pipe. Here is a link to our Quik-fixes:
http://www.sprinklerwarehouse.com/shop3/MiscFittingsRepair_Couplings.html

If you have black 1/2" funny pipe or swing pipe you will need an insert fitting (coupling) for swing pipe which is found on the following page:
http://www.sprinklerwarehouse.com/shop3/MiscRisers.html

If you have some kind if drip line you will need a coupling for the size pipe you have.
<img src=icon_smile.gif border=0 align=middle>


Saturday, April 27th 2002, 1:30pm

by scott

Hole in piping

I am looking for the proper way to repair a hole in my sprinkler system piping. It is about the size of a pencil eraser and it goes through both sides. It is on a straight portion of the piping. I don’t know the specifics of the piping but it is a softer plastic, meaning it has some give to it (it bends some) I am hoping I can get some help here or direction to a website that can help.