You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2543 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Saturday, November 3rd 2007, 4:02pm

by Azsotaka64

Are you sure? What eles should I try if this doesn't work?

Saturday, November 3rd 2007, 2:33pm

by mrfixit

Try this. Move the wire/s from the master valve to the common terminal. You have the right idea just the wrong terminal.

Saturday, November 3rd 2007, 11:59am

by Azsotaka64

Hunter HPV Valves not working at all.

I just installed 2 Hunter HPV valves w/ flow control and they aren't working. I know that i wired them right, i one of the wires off each valve for the master valve and then other two wires would go 1 to each of the zones. I have tested these valves before i installed them and they worked. I used 16 gauge wire. There is no electrical current, nothing, not even a spark. Whats the problem? I know its not my controller? Help ME!!