You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3930 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Tuesday, September 18th 2007, 6:42am

by jimmyburg

if this is what you are talking about
then yes it is a rotor. but you can use it but has a distance mim 28ft to 40ft.if you have a zone/station next to it,you might be able to run a pop-up of that zone if your pressure is in good standing, and cap the rotor off. just remember the pop-up nozzels put out a average of .5 or 1 gallon a min. and rotors put out 2gal to 5gal and more a min. I hope i have answered some of your questions.

Tuesday, September 18th 2007, 4:07am

by tcarmosino

sorry about the typo "PSG-ADJ-Shrub" should be "PGS-ADJ-Hunter PGP Shrub body, Adj.Arc Rotor" it's on the "Related Products..." tab off the Hunter PGP-ADJ picture link from the SprinklerWarehouse main page. would this be mixing pop-up and rotors? i'll try to get a plot plan and post it. thanks in advance...

Monday, September 17th 2007, 8:13am

by jimmyburg

the pgp is a rotor and not a fixed spray(pop-up)and as far as a psg never heard of one. but you should never mix pop-up and rotors on the same zone. as for your little landscape issue is it possible to draw a plot plan and show?

Monday, September 17th 2007, 7:54am

by tcarmosino


We have a six (6) zone sprinkler system with Hunter PGP-ADJ-06 heads that came with our new home.

A small to medium sized new landscape bed was installed over one of the PGP-ADJ-06 heads with a small plum tree and several ornamental grasses.

Should I "swap" out the PGP-ADJ-06 head for a PSG-ADJ-Shrub head?

If yes... are they interchangeable?