You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4151 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 8 posts

Thursday, September 6th 2007, 2:43am

by Wet_Boots

You aren't really thinking clearly on this. If there is an operating fan in the greenhouse, and you want misting to occur when the fan is running, then it's an electrical job. The pieces already exist, and it's up to you to purchase what's needed to connect the dots. If it happens that you are uncomfortable dealing with electricity, then hire an electrician. The manufacturing world isn't going to market non-electrical devices just because that's what you'd prefer to work with.

Tuesday, September 4th 2007, 3:39am

by Gobish

Purpose is for my small greenhouse. Currently, the exhaust fan turns on/off from an internal theromstat which is used to reduce the inside temperature. Also I have a misting system that I must turn on/off manually, to reduce the temp and raise the humidity. Unfortunately they are two separate systems which operate at different times. I want them to operate at the same time. When the fan turns on I want the misting system to turn, as I may be inside watching a football game.
I want to eliminate the manual operation without opening or accessing the fan controls. Surely there must be a mechanical valve for this application.

Saturday, September 1st 2007, 9:18am

by Wet_Boots

If this is a must-have-now situation, use standard equipment, and whatever time and materials are needed to get the job done. If there isn't any hurry, then feel free to invent something, and let us know what you came up with.

What is this "low-pressure misting system" for?

Saturday, September 1st 2007, 12:08am

by Gobish

Thanks, sometimes the obivious answer is not always the best. If you are an electrican, don't do plumbing and vice versa.

Friday, August 31st 2007, 11:41pm

by Wet_Boots

Good luck finding your mechanical valve. The time you spend searching for it will have been better off spent installing a wired setup.

Friday, August 31st 2007, 2:45pm

by Gobish

It can, but I am trying to kept away from trying to find the correct location of the thermostat wiring, also there is no wiring diagram. It would be much easier to use the pressure of the wind from the fan to operate a lever actuator on a valve, or pressure switch. It makes for a much easier installation not to deal with electrical 120v, or 24 VDC, or 12 VDC or try to design the required electrical hook-up/wiring. A mechanical answer is better.

Friday, August 31st 2007, 1:29am

by Wet_Boots

Why can't the thermostat also power a valve?

Thursday, August 30th 2007, 10:51am

by Gobish

Mechanical Valve

I looking for a mechanical valve that can be actuate by the wind pressure generated by a fan(fan motor is actuated by a thermostat). In other words, when the fan/motor is turn on by the thermostat, the fan blows air agaiinst the valve actuator, which releases water to a low pressure misting system.