You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3968 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Tuesday, August 7th 2007, 10:17pm

by Wet_Boots

Buy a new controller, if the old one gives you any trouble. A Hunter SRC-600 is a good choice. As for rotor heads, you'll want to get the PGP-ADJ model, which can replace any of the old G-series rotors you have. Both available from the store link above.

Tuesday, August 7th 2007, 3:06pm


Thanks for your reply Josh. I will look at the different PGP models available and try to match.
As for the controller, I assume you are talking about the box where I can set the time of day to water and number of minutes per watering session. If that is correct, I have a WaterMaster 4 Zone piece. Not sure where I can find the controller model.
Does that help?

Tuesday, August 7th 2007, 2:34pm

by jmduke7

What is the model on the controller?

As far as the rotor, yes. Hunter PGP rotor are what you should replace your older ones with.

As far as the bursted pipe. Best help I can give you is to call a friend and ask for some help. You may wonder aimlessly around looking for some wet areas, or some areas with some disturbed soil. That may point to the leaks if there are more.

Best of Luck!

Tuesday, August 7th 2007, 2:26pm


Old Hunter System

Just purchased a house with a Hunter underground sprinkler system that has not been used in years. Grass actually grew over the heads. Upon inspection of the system (might as well have been looking at the Space Shuttle engine for all I know about these things), I was able to manually turn the water on. It seems I cannot control the valves from the automatic controller (problem # 1). I am not sure what part I should be replacing to regain this control. Next, I have to replace a Hunter G Type sprinkler. It looks like a PGP Adjustable Arc Rotor (from pictures on Is this what I should be using to replace the sprinkler head?
I also have a burst pipe, hopefully only in one spot, but is there an easy way for me to spot this problem.
Any help or thoughts would be fantastic.