You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3978 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Thursday, August 2nd 2007, 2:33pm

by Fishinspot

Hi Josh,

I'm the guy that came in your shop Saturday and bought the new controller from you. Mine was burned up. The controller install was as easy as you told me it would be. My pump is mounted on top of the ground. Everything is rainbird. I did find one very small pinhole leak on the pvc coming out of the outlet side of my lawn pump that runs in the ground and connects to the sprinkler lines but it is a very small almost unrecognizable leak.



Wednesday, August 1st 2007, 3:19pm

by jmduke7

I am to assume since you stated you have a "control box", that your well contains a submersible pump. If this is correct, then I will assume you have some major problems. Since subs are usually set deep in the water they very rarely quit pumping water (from droughts, drawdowns & etc) unless there is a pump failure, But this also does not mean that they won't. Take a look at the equipment near your controller for your irrigation. Look to see the products that are there, and take note of model numbers and brand names. This will give me a better idea of what you have and what will be some of the most productive steps to take to rectify the problem.

Wednesday, August 1st 2007, 2:48pm

by Fishinspot

How to check pressure

****o all,

My system has very little water coming out of the heads(about 2 feet)on zone 1, zone 2 & 3 doesn't spray at all and 4 & 5 have same pressure as zone 1. Last year my system had awesome pressure. I am thinking either my water supply coming from the well is very low, I have a leak somewhere in the system, or some roots are collapsing the pipe somewhere. I am using a well. How is the best way to start troubleshooting this. My control box is wired correctly and seems to be in order. Should I cut my PVC coming out of the pump and attach a pressure guage to start? What is an average pressure I should look for. Should I start digging from the pump around the whole yard and look for a leak?? Another problem I have is I only know where 2 of my zone valves are located. Haven't been able to find the other 3 yet after much searching[:(!][: (!] Like I said the last 6 years I've owned the house the system has performed great. Any suggestions would be appreciated.