You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2576 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 5 posts

Friday, August 3rd 2007, 5:46am

by Tom

The problem with heads on only one side is poor coverage. You'll have to overspray and overwater the area just to get it covered.


Tuesday, July 31st 2007, 12:45pm

by SMM

Thanks everyone!

Tuesday, July 31st 2007, 2:29am

by worachj

Toro performance chart for fix spray nozzels. Look at the performance chart for “Special Patterns” on page 6.

http://www.toro.com/intl/ca_en/irrigation/res/smturfsprink/570z/brochures/570z_gb.pdf


Monday, July 30th 2007, 7:42pm

by Wet_Boots

Both Toro and Rainbird make side-strip nozzles that can cover a 9x18 area. Toro's is 9SST, and if you give it extra pressure, like 50 psi, then the pattern becomes 10x20, which should work for you.

Monday, July 30th 2007, 3:37pm

by SMM

Strip Sprinklers

I have an area that is 100 X 10 is there any spray out there that would let me use the heads on only one side. I'm looking for something like a rectangular pattern in the 10 x 15-20 ft. range. Any help would be appreciated.