You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3948 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Sunday, July 29th 2007, 4:31am

by Wet_Boots

You can also just use a insert x FPT elbow at the end of the line, and thread a regular funny elbow into it.

Sunday, July 29th 2007, 2:20am

by R_Andersen

Thanks. I looked on this website since I'm ordering heads and other parts here but I can't find this fitting.


Sunday, July 29th 2007, 1:16am

by SprinklerGuy

yes it also comes in coupler may need to look here at Sprinkler Warehouse or at a commercial sprinkler warehouse..good luck.

Saturday, July 28th 2007, 12:58pm

by R_Andersen

3/4" elbow to funny pipe fitting?

I'm planning a new install with 1" an 3/4" poly laterals and in some cases I will have a 3/4" poly line ending at a sprinkler head. Does a 3/4" elbow with a 1/2" funny pipe fitting exist so I can go right from the 3/4 poly to the funny pipe? If not, what would be the best way to make this connection?

Thanks for any help,