You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4004 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Saturday, July 7th 2007, 3:09am

by HooKooDooKu

Smaller pipe equates to more pressure loss as water flows through it.

With a starting pressure of 40 psi, you are already starting on the lower end of things to design a system.

Try reading over

Friday, July 6th 2007, 3:51am

by familyguy

pipe size

My neighbor had his system just installed and I noticed they used 1" pvc all throughout the system. To the valves as well as to the heads with a 1/2 inch transition to connect the heads. Like me, he has well and septic system. They ran a 3/4" copper to the outside from where the whole system is 1" PVC.
I have 1" PVC from well pump to the pressure tank, from here it's 3/4" to the house. I imagine his is same since it's the same house type, etc. I'm getting 40 psi at the tank with about 8 gpm. Will the system function any better or worse using his 1" method versus using 3/4" pvc for laterals? How will this sizing affect the pressure? Any imput appreciated.