You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4106 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 8 posts

Saturday, June 23rd 2007, 9:36am

by Wet_Boots

Aside from creek water issues, I hope your sprinkler system doesn't also have a city water connection, without there being an RPZ backflow preventer in the plumbing.

Saturday, June 23rd 2007, 7:03am

by tviles

Interesting reading WB, but I have not damned anything up and don't plan to. If the small creek goes dry, well it goes dry and I can't water. I can switch back to potable water but the rates have increased here so much I doubt if I do. I think that creating a larger opening than my 2 inch check valve could help. If I were to increase to four inch pipe size and drill holes in it and screen that I might go longer in between cleanings. It's not to hard to get in the creek and brush off the screen its the snakes that makes me nervous.

Saturday, June 23rd 2007, 5:16am

by Wet_Boots

Yes, the water belongs to the state. For an example of what might happen if there wasn't this governmental control, look up "Johnstown Flood"

As for intake from creeks, the idea is to somehow get some clear water to draw from, or to configure a sprinkler system to run with cruddy water, needing nothing more than, say, 20 mesh filtering, with anything smaller being blown through the valves and heads.

Friday, June 22nd 2007, 4:35pm

by tviles

I knew I could count on you WB, so now my curiousity is up. Who's water is it, I'm going to guess the state? Am I correct? One more, as in a intake device IF I were to use a component that can endure the crud what would that be? Thanks you always get me thinking with your answers. My lawn does look better with creek water than potable water, except for all the nutsedge I seem to be growing. Tracy

Friday, June 22nd 2007, 2:14pm

by Wet_Boots

You can't do anything to the creek water, period. It is not your water, even if you own the land on which the creek runs. Even a 'sump pit' might be frowned upon, but it is an idea.

The most practical approach to irrigating with surface water is to use components that can endure the crud, so the filtering required is minimal.

Friday, June 22nd 2007, 12:51pm

by tviles

Looking for price but I'm afraid I'm going to say Yikes when I find it. I only have 240vac down there at the pump. Thanks I'm still looking at it.

Friday, June 22nd 2007, 11:55am

by HooKooDooKu

How about an unfiltered intake that leads to an automatic filter kit ( )

Friday, June 22nd 2007, 9:48am

by tviles

Creek Water Moss

This is my first summer pulling water from the creek. Moyno pump model 36701 1½ electric motor, 2 inch suction line with screen covered check valve in the creek. Problem is moss covering up intake screen. It is nylon window screen covering check valve. Then after the pump I screen again with a 150 mesh irrigation screen. What are some options for me? Kill the moss in the creek water - if so with what? Build something in creek like a sump pump pit or something? Let me know if you can think of something. I water the lawn with the water so nothing too harsh. Also it is a feeder creek into Hillsdale Lake that supplies many small towns with drinking water. Thanks, Tracy Spring Hill, KS