You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2693 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 8 posts

Sunday, June 17th 2007, 4:38am

by jmduke7

Kinda sounds to me as if there is a problem with the poppet in the PVB. Try following the steps to correctly seat the poppet and see if that will help.

This link will be helpful...www.febcoonline.com/pdf/980001.pdf

Sunday, June 17th 2007, 3:29am

by chargebk

Replaced PVB month ago. 7 other zones are 100% operational.

Saturday, June 16th 2007, 5:44pm

by jmduke7

Is this te first time this year the system has run? Has your system / PVB been exposed to freezing temperatures?

Saturday, June 16th 2007, 4:57pm

by chargebk

Can either of you direct me to a few tips on how to troubleshoot the heads?

Saturday, June 16th 2007, 4:45am

by jmduke7

Boots is correct. The way the unit is designed to function is to create a gap (air gap) when there is a possibility of a back syphon-age. You may have a broken line or even some damaged heads. Check them all to see that they are working properly. you might even want to reset the back-flow device.

This link should be helpful... ( www.febcoonline.com/pdf/980001.pdf )

Saturday, June 16th 2007, 4:03am

by chargebk

Febco 765-1. Can the PVB be adjusted?

Saturday, June 16th 2007, 1:05am

by Wet_Boots

What's the make and model of PVB? If the zone has a big enough flow, or a big leak, your pressure may be dropping to a point where some PVBs will vent water.

Friday, June 15th 2007, 5:20pm

by chargebk

PVB, heads, line, or solenoid valve issue?

Have a zone with 5 heads that every time the zone opens the PVB breaks open. Not immediately after a moment or so of the zone pressurizing. All heads are operational or so it seems. 4 other zones with just as many heads if not more are 100% operational. Is there an issue with the solenoid the line one of the heads or the PVB.

I had the zone working fine and cycled the system 1 time and when this zone came back up it failed to operate and the PVB broke open again as explained above.

New to the sprinkler service thing.

Any and all help is appreciated.