You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4019 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Saturday, June 16th 2007, 4:34pm

by Wet_Boots

The controller is far down on the list of possible culprits. A valve problem is most likely, and the wiring also bears consideration.

Saturday, June 16th 2007, 6:32am

by mrfixit

It sounds like the ground wire to the backyard is disconnected--
Sometimes the water supply to the backyard sprinkler valves gets turned off without you knowing about it. The controller itself is probably ok.

Saturday, June 16th 2007, 5:59am

by leesahly

Replace or Repair?

Hi There, I have an old Imperial Valet Contoller. It worked fine until last season when the sprinklers in the back yard stopped turning on. They worked fine in the front yard. I would rather fix this system than replace it. Can anyone tell me what might be happening?
Thanks so much[:)]