You are not logged in.

  • Login
  • Register

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2183 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 6 posts

Sunday, May 27th 2007, 7:48pm

by dzuroff

I was able to trace the wires to find out where they went so everything is now working great. I was just doing some research to try and make the job a little easier. Thanks for trying to help.

Saturday, May 26th 2007, 4:01am

by Wet_Boots

If you can't identify which of your wires are which, it might be time to call in a professional.

Friday, May 25th 2007, 5:30am

by dzuroff

I had checked that out previously. It looks like the manual only has information on programming the timer and I didn't see anything in there about wiring.

Friday, May 25th 2007, 3:18am

by Wet_Boots

http://www.rainbird.com/pdf/diy/man_CRC.pdf

Friday, May 25th 2007, 2:27am

by jmduke7

www.rainbird.com/diy/literature/timers.htm

(scroll down about half way)

Thursday, May 24th 2007, 6:37pm

by dzuroff

Replacing Controller

I have a very old Rainbird CRC-6A controller that I am replacing with a Hunter SRC-600i. I am a little confused with my wiring and was wondering if anyone knew where I can find information on wiring up a Rainbird CRC-6A. I figured if I can get more information on how the original controller is wired it may shed some light on what some of the wires lead to. The original setup is connected with a rain sensor and also a relay that fires up my pump. The new setup will also include a rain sensor (The wireless Hunter rain/freeze clik) and will be connected to a relay switch for turning on the pump. Any help would be greatly appreciated.