You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2749 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Tuesday, May 15th 2007, 7:15pm

by jmduke7

It's pretty plain forward to install. But you might want to check with local codes to see if that BF is still compliant. Nothing worse than going through all the trouble to replace only to find out that it is the wrong one. Once you get that installed you can move on to checking the system. Just do a quick manual start and see what you have. If you notice anything and have any more problems, post it on here and we can help!

Tuesday, May 15th 2007, 2:55pm

by wonkanator

I am also new to sprinkler systems.

I moved into a house a few years ago that has a sprinkler system installed. The PVB is a Febco 765-1. I didn't really know anything about sprinkler systems, but somehow got the system going the first year and it worked fine. I didn't do the proper winterizing and the following spring I found out that one of the ball valves cracked and a couple other parts broke (I believe they are the bonnet and poppet). I didn't feel like spending the money to have it fixed at the time and about 3 years has passed and I am now interested in getting it up and running again. Is the fact that I haven't run it in 3 years a bad thing? Are there potential problems that I might come across?

Is there any advice anybody can give me as to how I should go about checking to make sure everything is working? I am just about to purchase a new Febco 765-100 PVB to replace the old one. Do I need to hire a proffesional to install it for me, or is it something that any idiot with the right tools (myself) can do? Any help would be greatly appreciated.