You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4051 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 9 posts

Thursday, May 17th 2007, 6:46pm

by lush96

well if you want a brass nozzle that bad on a plastic pop-up, go ahead. should still use rotors in an area that size.

Wednesday, May 16th 2007, 3:48am

by Wet_Boots

no brass head - just the brass nozzle on a standard plastic popup

Tuesday, May 15th 2007, 7:37pm

by lush96

man you people cant read. i said installing the head can be finiky, not the nozzle. i mean that they tend to stick more than a plastic one if it is installed a little to low. now a pro wouldnt have a problem with this, but a home owner may. but like i said, if your looking to throw 17-20 feet, use a rotor with a low angle nozzle.

Tuesday, May 15th 2007, 3:28am

by Tom

the weathermatic brass nozzles will screw on in place of plastic nozzles on both the rainbird spray heads and hunter spray heads

Tuesday, May 15th 2007, 3:25am

by Tom

how is a brass nozzle a finiky install?

Monday, May 14th 2007, 8:05pm

by lush96

brass are also very expensive as compared to plastic although if they are installed correctly, they will last much longer than plastic. but its a very finiky install. honestly if you are looking to cover a 17 or 20 foot area....... a rotor with a low angle nozzle will do much better unless you are just a big fan of sprays.

Saturday, May 12th 2007, 4:58am

by Tom

weathermatic has brass nozzles that offer spray distances of 20' and more. they do however eat up lots of gpm

Wednesday, May 9th 2007, 6:47pm

by jmduke7

I am unaware of a fixed arc nozzle with a radius of 17'. You may be thinking of the adjustable arc nozzle with a 17' radius.

Wednesday, May 9th 2007, 6:16pm

by twhite4014

spray nozzle radius

The info on the Hunter fixed spray nozzles lists a 17 ft nozzle. Does SprinklerWarehouse carry this? The online store only lists the 15 ft.