You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2546 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Tuesday, May 1st 2007, 3:35pm

by Tom

Google watever make and model you have. Be careful with the springs- they can bite ya

Tuesday, May 1st 2007, 9:22am

by Scooter

Is there a diagram that would show how the check and / or relief valve work?

Can I replace those parts? I have 2 places that I can take apart - the siphon and then a part on top. Both have springs in them. The top part does not look like I could get the plastic part and spring out of the brass fitting.

Tuesday, May 1st 2007, 8:52am

by Tom

fouled check or relief valve

Tuesday, May 1st 2007, 7:36am

by Scooter

Backflow / vent not shutting

I just started up my sprinkler and water is shooting out of my vent. I have a water shutoff on the outside and a shutoff to my sprinker. When I turn on the water it shoots out the bottom/vent. When I slowly open the sprinkler part it still shoots out the bottom. If I run a zone the water stops coming out the bottom and flows to the sprinklers but when it stops it shoots out the bottom again. Why is the vent/backflow not shutting? Can I fix this with out replacing the whole device?

Scott