You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2792 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Thursday, April 26th 2007, 8:09am

by mmcmusnret

Thanks, Wet Boots. That's a start.

Thursday, April 26th 2007, 7:04am

by Wet_Boots

Google "McDonnell & Miller" to get a start

Thursday, April 26th 2007, 6:33am

by mmcmusnret

Low Flow Pump shutdown Switch

I've Googled like crazy with no luck so now I must ask the experts...I have a 2hp Meyers centrifugal sucking out of an irrigation ditch currently supplying a hose bibb manifold, 2 inch piping on both suction and discharge. I'm installing my controller/pump start relay and first circuit this spring. I'm a retired Navy Machinst's Mate (pumps, valves, etc...) and have studied IrrigationTutorials to refine my primarily closed-loop-pump-system experience.
My concern is protecting my pump (and not going broke doing it!) should my ditch go dry (never has but could) or one or more control valves stick open or fails to open...basically anything that could cause either loss of flow or loss of pressure. Does anyone have a solution with a source for parts?