You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4048 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Monday, May 21st 2007, 2:18pm

by Jef

sch. 40 is not uv resistant and i would not suggest u use it. Use sch. 80 and if you're going higher than a few feet, i would suggest using either galvanized or copper (copper looks nicer)

Saturday, April 14th 2007, 3:51pm

by ggunnell

I even bring my brass heads in and plug the lines [:)] . . .
and the MaxiBirds look like plastic.

Anyway, I've had advice to go with the rotors which was my original plan.

Wednesday, April 11th 2007, 4:03am

by Wet_Boots

Take impact heads inside for winter? Going to read them bedtime stories?

Wednesday, April 11th 2007, 1:51am

by ggunnell

Rotor or impulse on standpipe?

I'm going to place some of my perimeter rotors on scd 40 PVC standpipes attached to my 42" high 4x4 wooden fence posts.
I was going to use Rainbird 5000 rotors; however I also see a small impulse model, the Maxi-Bird, that would work.

My thought is that the rotors would overwinter OK, but I'd probably want to unscrew the impulse heads and take them inside.

Anyone have any thoughts? [:)]