You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4243 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Saturday, April 7th 2007, 5:48am

by HooKooDooKu

IF you are using 1/2" drip tubing (thin stuff to allow emmitters to be punched into the tubing), then the maker of your tubing likely makes a connector to transition from hose spicket to tubing. Usually, this is a part of a set that would include a pressure reducer, a simple backflow preventer, filter, and 1/2" tubing connection that all connects up to your hose spicket.

The transition of 1/2" tubing to 1/4" tubing is done via double barb fittings. The 1/4" tubing slides over one barb, and the other barb is punched through the 1/2" drip tubing.

Saturday, April 7th 2007, 2:33am

by jasont


Thanks for your response to my question.

I have a 2 follow-up questions though:

What do I use to connect the 1/2'' tubing to the 1/4'' tubing?
What size tubing will connect to my water source(in my case, the hose spicket)?

Thanks in advance!

Friday, April 6th 2007, 12:37pm

by cjjsprinkler

Your SXB-360-SPYK has a 1/4" barb inlet, so 1/4" distribution tubing should be used to connect to your 1/2" or 3/4" drip tube.

Friday, April 6th 2007, 5:09am

by jasont

Tubing Question

Good morning.

What size tubing will fit the following item:
Xeri-Bubbler - 8 Streams

Thanks in advance!