You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 5275 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Thursday, December 9th 2004, 8:45am

by nestors

Hunter has a inline flow device

Friday, August 20th 2004, 10:38am

by billingsleyj

I would try an in-line reducer to control head pressure. As long as it does not adversly affect you flow rate you should be fine.

Wednesday, August 18th 2004, 12:20pm

by njwlog

pressure reducer at rotor

I am looking to control(lower) the PSI at the rotor head. My runs are relatively long w/ elevation changes that effect PSI from the start of the run to the end. Does anyone make such a device?