You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2794 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 6 posts

Thursday, March 1st 2007, 3:34pm

by jmduke7

I am guessing here, but it is about all I have got so far. I would guess that since they are all installed on the ground level, they are draining when the system is turned off. When the system is turned back on, the water / air rushes through and causes the adjustable emitters to self adjust themselves / or give a spitting sound or effect. This can give the the false since on the emitters not having adequate pressure / or flow. I would suggest pressure regulation on all of your low volume / drip lines, and allow adequate time for the system to stabilize before checking it again (turn on and let run for about 10-15 mins). Most low volume systems are just that, real low volume, and they need more time to deliver unlike their standard irrigation counterparts. Its a stretch and its a guess!

Thursday, March 1st 2007, 1:58pm

by tsimone98

These are the adjustable Shrubbler type emitters.
It is installed on level ground.
I am allowing sufficient time for them to bleed.

Thanks for all your help.

Ty

Thursday, March 1st 2007, 11:22am

by HooKooDooKu

Are you giving the system enough time to bleed all the air out on restart?

Thursday, March 1st 2007, 1:45am

by SprinklerGuy

Adjustable Shrubbler type emitters? Sounds like it..the kind you can open and close and anything in between?



They tend to "adjust" themselves if you know what I mean.....even the "flag" type emitters will do this sometimes......I recommend switching to a pressure compensating type emitter...this type of emitter will NORMALLY not have this problem, level ground or unlevel ground.....

I think we may need more info.

Wednesday, February 28th 2007, 5:02pm

by jmduke7

Is the system installed on level ground? Are there any emitter devices on ground level, or are they on risers. Are these actual emitters or low volume sprays?

Wednesday, February 28th 2007, 1:29pm

by tsimone98

Drip irrigation system problem

I have a 4 zone drip system. As the system runs, I adjust all of the drippers. Then shut off the system for 15-20 minutes. When I restart some of the drippers do not have enough pressure If I manually open the dripper slightly (loosen/unscrew) pressure comes right away with some spitting and popping (I assume the system is bleeding itself).

I've replaced all of the drippers just to take that out of the equation.

Any help on why this is happening would be great.

Thanks,

Ty