You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2816 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Thursday, February 8th 2007, 11:36am

by tsimone98

A new diaphragm did the trick. There was also various debris in the path of the solonoid.

Thanks for the help. This is a great forum.

Ty

Thursday, February 8th 2007, 12:57am

by SprinklerGuy

Try the diaphragm first....BUT....what I would do is go buy a new valve, install a new bonnet(plastic top part), new diaphragm and new solenoid....

The entire valve may cost less than buying all the parts seperately, and sometimes you will find that you need the other parts anyway.

Good luck and don't forget not to pinch the nipple! (sprinkler tech joke, be careful not to pinch the little "nipple" on the bottom of the bonnet that is directly under the solenoid....)

Wednesday, February 7th 2007, 4:26pm

by tsimone98

Richdel 205 T----Bad Valve/Diaphram??

I have four Richdel 205 T's for my entire yard. Stations 1,2 and 3 work normally (and the solonoids are quiet). Station 4 is not working properly (and the solonoid is noisy). Water comes out, but just barely dripping. Does it sound like the whole solonoid is bad or should I try to replace the diaphram first?

Any thoughts and help are greatly appreciated.

Thanks,

Ty