You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2836 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Wednesday, January 24th 2007, 5:16am

by Tom

Sounds like you have an older system..

Have you checked for leaks?

The pipe sizes may be too small also.

What is the outlet pressure at the pump?

Tuesday, January 23rd 2007, 9:16am

by drpete3

You may have too many heads per zone. does you pump come on and stay on during watering? If so what kind of pressure reading are you getting while each zone is on? I have a lot of experience with this type of system and If I have more info i can help you.

Tuesday, January 9th 2007, 8:25am

by Wet_Boots

You can usually adjust the pressure switch that controls the pump, and get more pressure that way, but do keep an eye on things, so that you don't exceed the pressure rating of the storage tank.

Tuesday, January 9th 2007, 4:11am

by wcgardner1

How to increase water pressure.

I have a question about adding more water pressure in my well system. I have and 1.5 acres of land with a house in the middle. I need to get an irrigation system up and running. The well pump provides less than adequate water pressure. How can I increase the water pressure to my 10 zones.

Will