You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 5087 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Tuesday, July 20th 2004, 12:14pm

by snmhanson

That's what I was thinking, however, I really don't have any alternative to get water there. My only thought is that I would have only one spray head with strip valve covering the area. Maybe two but I wouldn't have them overlap more than a foot or so. If I'm getting double to triple coverage with the rotors spaced head to head maybe it will be close. I haven't looked at the precipitation rate of the pop ups with strip heads yet. Maybe I'll do that right now...


Tuesday, July 20th 2004, 7:34am

by bobw

You're in a tough spot. Because rotors spread water around instead of just watering one spot like pop ups do, they only put out abut 1/3 or so of the amount of water per square inch per minute of pop ups. If you try to mix the two types of heads on one line, you will find that you will be grossly overwatering the area coverd by the pop ups.

Tuesday, July 20th 2004, 5:23am

by snmhanson

Splitting Risers

I recently installed a system at our house and everything seems to be working as planned for the most part. One issue I am having, however, is an area of about 30' wide by 6' deep not getting water. This was expected as we were going to just put rocks or bark there but now we decided it would be nice to have grass. This is directly next to a zone with rotors and three rotors are on the edge of the zone right next to the unwatered area. So my question is, can I T off from the funny pipe on those rotors to install some pop-ups with strip heads in them? Or will this result in unsatisfactory performance from the rotors (and pop-ups)? I know it's tabboo to even use rotors in this zone but I don't really have any other choice. I want to try to avoid digging too much out to expand the pvc so I was hoping to be able to just split off from the risers in this case. Thanks for any advice.