You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 10 posts

Saturday, December 31st 2016, 6:17pm

by dgschwartz@oh.rr.com (Guest)

second controller voltage feedback

The simplest way I found and cheapest if you can do your own plumbing is to parallel your old master valve with an new addition valve to the new controller to control. Works great and cost less that $25.00. :)

Sunday, November 6th 2016, 2:07am

by Etty (Guest)

HkbbBIfjiR

These were great, delicious, great texture. The palm sugar was a beast, I grated by hand and got a great workout. It was a solid disc from an Asian market. How do you manage yours? I tried chopping, using a metal mallet, dropping on concrete.. It di&d;#8217nt want to break up.

Monday, October 10th 2016, 7:14pm

by billydv

I thought I should post this as I am doing exactly what was mentioned earlier in this thread. Quite simply, isolators are way too complicated and unreliable to accomplish this. This can be accomplished via 24vac relays. Using a separate 24vac transformer, wire the two wires from the transformer to the two normally open relay contacts. wire the other two contacts to the master valve. Then using the master and common terminals of your controller, wire those to the relays, 1 per controller. Your controller is now only activating the relay solenoid. Actual current is coming from the transformer. My system has 17 controllers and the little board I made has 17 relays.

Saturday, September 2nd 2006, 5:20pm

by Wet_Boots

The Isolator webpage describes some of the interconnection problems with two timers. I would just use some homebrew circuitry with parts a Radio Shack would have in their stores, and be just as well off.

Saturday, September 2nd 2006, 10:56am

by jmduke7

Although multiple controllers on one system aren't that uncommon in my area, I do not recommend them either. To many complications, variations and etc.. But if you still desire to go this route, this device here will simplify things.
www.transitionalsystems.com/isolator.htm
or
www.transitionalsystems.com/piggyback.htm
Of coarse the real chalenge is finding a distributor that caries these! Good luck!

Saturday, September 2nd 2006, 10:54am

by jmduke7

Although multiple controllers on one system aren't that uncommon in my area, I do not recommend them either. To many complications, variations and etc.. But if you still desire to go this route, this device here will simplify things.
www.transitionalsystems.com/isolator.htm
Of coarse the real chalenge is finding a distributor that caries these! Good luck!

Friday, September 1st 2006, 6:00am

by HooKooDooKu

<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by davel</i>
<br />Yeah I can see that if the MV is on at both controllers by accident you could theoritically get a "pop" on one of the controllers from the additional amprage (or voltage) whoah it has been 10 years since my one circuits class in college so I don't remember. I'll probably end up buying a 16 valve controller but I just wanted to get away cheap...
<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote">

Having MV on at both controllers isn't as much of an issue as having both controllers directly connected to MV and only ONE of them being turned on.

If the controllers are identical (at least in voltage output) then when both of them are on at the same time, current won't flow between them because they are at the same voltage potential. Instead, the MV will just pull half of it's current from one controller and half from the other.

The real question is what happens if MV outputs from both controllers are connected together and one is "on" and the other is "off". It depends upon how the controllers are designed. If the controllers operate relays such that you have an open circuit when the valves are off, then everything is great and you only have interconnection issues when both are "on". But if the output is controlled by solid state circuitry, the two controllers might not play nice (again, it just depends upon the design of the controllers).

Friday, September 1st 2006, 5:07am

by Wet_Boots

I always wonder at home systems with more than a dozen zones, and wonder if things couldn't be simplified somewhere. Used currently-made controllers do have a resale value, so it isn't money completely lost.

Thursday, August 31st 2006, 7:20pm

by davel

Yeah I can see that if the MV is on at both controllers by accident you could theoritically get a "pop" on one of the controllers from the additional amprage (or voltage) whoah it has been 10 years since my one circuits class in college so I don't remember. I'll probably end up buying a 16 valve controller but I just wanted to get away cheap...

Thursday, August 31st 2006, 2:49pm

by Wet_Boots

I've done controller interconnections before the modern-day solid-state designs. There are ways for things to go wrong. There is a possibility of one controller feeding voltage/current/power into another controller with unpleasant results. It can still be done safely with solid-state controllers, but it requires you to assemble some solid-state circuitry of your own, in order to get the master valve operation you want.