You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3047 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Saturday, August 19th 2006, 3:24pm

by Wet_Boots

If your soil is particularly sandy or gritty, most any head will wear down prematurely, and stainless steel risers won't help much. Installing a head so that the soil can't get at the seal is one good way to avoid this problem. (the heads will seem too high, at first, but the grass will catch up, and you might need to raise the heads again)

Saturday, August 19th 2006, 1:40pm

by jmduke7

Thought the stainless steel risers are more durable, In your case, I don't know that it would warrant the extra expense. I believe I would stick with the 6000 series instead. Nelson offers a five year warranty on all of their rotors (for any reason). So with that being said, just return them for warranty exchange when you see they are having problems.

Wednesday, August 9th 2006, 5:05pm

by engineer9

Nelson 6005 vs. 6000 Rotor Head

I am replacing some old Nelson 5090 sprinkler heads (plastic riser)and noticed that Nelson now has a Model 6005 head with a stainless steel riser. I have had some problems with scoring of the old plastic risers with the result that they stick and will not retract. When this happens I take them apart and use a crocus cloth to smooth the surface before re-installing them; however, this doesn't always work. Is the 6005 stainless steel riser that much better (than the 6000 with plastic riser)in this service to warrant paying twice as much? Has anyone compared the relative life of the two type?