You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4983 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Sunday, October 31st 2004, 1:40pm

by nestors

The Master valve wires up in the clock one wire to the MV connection the other goes to the common either in the clock or in the common connection in the yard ,replace it with a HPV (high pressure valve ,hunter brand ) this will do it.

Nestor's Sprinklers

Wednesday, June 30th 2004, 9:47am

by aquamatic

Wiring is the same as any other valve unless you have a unique setup. Master valves always get more wear and tear than your zone valves. You might need to replace

Wednesday, June 30th 2004, 7:02am

by WESavage

Master Valve Issue

Have Buckner Master Value, wiring has been messed up in box. Is there anything different in wiring the master valve except having it on a seperate wire to the "pump or master side of the control box" and to the common ground. Seems system has to turn on master first than other valves but does not always do that. Is there a special way to wire?