You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2913 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Tuesday, August 8th 2006, 5:34pm

by Kilgon

Wet Boots,

I took your advice and found a screen strainer at Lowes. It seems to be doing the trick.

Thanks[:)]

Thursday, August 3rd 2006, 3:12am

by Wet_Boots

Install a strainer anyway, and the valves can remain. It will subtract a few psi, but you can live with the pressure loss, or even re-nozzle the heads, if need be.

Wednesday, August 2nd 2006, 5:58pm

by Kilgon

Sticky Nelson valve

Hi, I am running my system off a well. I have Nelson's model 7911 valves and am having trouble with the valves shuting off. I belive this is due to fine sand particals in the water. I have consider putting a filter in line but it lower my GPM below that of what I have the heads set for. Is there a valve that I can switch to that will handle this type of problem better?

Thanks[:)]