You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1360 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Saturday, April 2nd 2011, 4:50pm

by Tom1034 (Guest)

What would be a good replacement?

The Toro Flo Pro valve was discontinued a long time ago. Unless you like to spend your spare time fixing these valves over and over (and over and over and over) again, you just replace the entire block of valves at once.


I also tried to fix the solenoid for toro pro. though most worked one does not shut off completely. Now mind you unless you wait a few days you would most likely not notice as it is looks to be off. it is not. What would be a good replacement for the Toro Pro valves?

Monday, July 31st 2006, 2:56pm

by Wet_Boots

The Toro Flo Pro valve was discontinued a long time ago. Unless you like to spend your spare time fixing these valves over and over (and over and over and over) again, you just replace the entire block of valves at once.

Monday, July 31st 2006, 12:32pm

by needhelp

Toro Quick Link Control Valve

Have had little luck with finding a Toro Quick Link sprinkler system control valve. Not sure what number you need but on the valve itself I find the following stamped numbers: F91 and on the other side 280 06 14. On the stem I see 24VAC50-60Hz, 220mA Inrush, 180mA Holding.

Trying to avoid replacing entire control valve box but the one that failed is right in the middle of the series. Only need one but would buy several for spare parts.

Thanks

Lou Storino
Darien, Ill.