You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2970 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Tuesday, July 11th 2006, 4:37pm

by Wet_Boots

The flow control is a throttle, which you close down until it affects valve flow, whereupon you back off. Makes the valve behave better, especially on closing.

Tuesday, July 11th 2006, 2:05pm

by larry benoit

it's random valves.

Tuesday, July 11th 2006, 11:58am

by DOORZ

The flow control on the valves is simply a valve that lets more or less water flow into the valve. Turning it one way opens it up, and the other way closes it.

Maybe you have a bad solenoid thats sticking in the open position. Is it the same valve(s) this happens to, or is it happening randomly?

Tuesday, July 11th 2006, 10:05am

by larry benoit

hunter valves with flow control

I have 9 zones with hunter flow control valves. Nothing came with the valves that tells you how to adjust the flow control. Consequently I am having problems with different valves sticking and not turning off after an automatic cycle. My thought is that my pressure regulator is set too low or the individual valves need to be opened up.
I am pretty sure there isn't anything stuck in the valve because when I turn off the timer and turn it back on the valve stays closed.
Any ideas out there?