You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3774 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The first post

Sunday, June 20th 2004, 2:34pm

by jmm1804

Rainbird brass valves

I've cleaned up some of them, and they do work beautifully.
Zone One has 4 pop ups.
All four pop ups leak, they are brass. The local hardware store only had 3 of the 1/2" female 90 degree threaded connectors which these older kind use to attach to the PVC pipe.
Guess my question is : do these older Brass rainbird half circle pop-ups outperform the newer plastic type? Am I missing some rubber gaskets on these, causing them to leak and sputter?
These appear to be only 35-50% of performance.
This repair project is going to be time consuming, since its not my
main occupation, and as a Do-It-Yourself my efforts so far have been successful. All 9 zones discovered, installed the control and lines.
Zone 2 is okay, but has some still "low" pop-ups, and 1 or 2 "leakers"
Zone 3 is better but configured only for misting - all with brass rainbird sprinklers with small nozzles.
Zone 4 : installed a large sprinkler *new from store*
to replace a defective brass one which I guess lost the cover and so forth... Have not activated beyond zone 5, since another Leak burst open today. Geez, this is work!