You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2851 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Sunday, June 25th 2006, 5:56pm

by xpedient

Febco is the way to go. If you need a double check assembly the 825Y would be your best bet.


Thursday, May 11th 2006, 8:23am

by thedavegw

Yes, that is one of the devices allowed, and was actually pushed by the inspector as opposed to a pvb. I was just wondering why the Febco 850 on the site is $53 and the Watts 007 is $93. Is the Watts that much better? What features are different? Another question I have is concerning a master valve. Are those recommended, what are advantages disadvantages? Also is there a filter I can place on a 1" sch-40 pvc pipe before the backflow device? Any help would be greatly appreciated as I am a sprinkler novice and am attempting to install my own system. Thank you all in advance.

Thursday, May 11th 2006, 4:11am

by Tom

are you sure a double check is permitted in your area?

Wednesday, May 10th 2006, 6:28pm

by thedavegw

Watts vs. Febco

I am looking at using a double check backflow device. My question is why is a Watts twice as much as a Febco, at least on sprinklerwarehouse, and is it worth the additional money to get a Watts. Looking at a 1". Thanks.