You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3748 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Thursday, June 17th 2004, 8:12am

by aquamatic

One wire from each valve( doesnet matter which one) will tie all together along with your ground wire from your series of colored wires. Normally its your white wire. If you need to determine which one of the other colored wires are being used. It sound like you have 3 valves and 5 wires left.

Go to your controller and open up to the wiring. FIrst confirm that the ground connection is the white- If not whatever color is connected to your ground terminal then thats the one that will tie in with the forst wires we mentioned.

Then determine which colors are connected to zone terminals.

Go back to your valves and connect those colored wire one to each of the second wire on each valve. You can rearrange depending on what area you want to be what zone.

Good Luck!

Thursday, June 17th 2004, 7:33am

by kimble

Rain Bird Sprinkler wire repair

HELP ! We just got a new puppy and unfortunately,...he chewed at the wiring on the sprinkler valves. They are still salvageable but...how do I figure out what goes where? It has 3 pipes that have two black wires each on top of the valves...along with a: red,blue,white,green,yellow,orange wire. Where do these wires go?