You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4541 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 5 posts

Wednesday, June 14th 2006, 1:51pm

by Wet_Boots

(Indoor Master Valve = dumb idea) This equation stands now and forever. Tampering is rarely an issue. Lack of complete outdoor nobody-needs-to-be-home access is an issue. People do sell their homes. And new buyers don't appreciate being stuck at home waiting for the repairman because of some amateur installation.

Wednesday, June 14th 2006, 10:58am

by savtong

the backflow preventer is located outside.
I'm planning to install this above the "T" leading to outside while the other end of the "T" leads down to the drain. So for servicing this master valve, I can just drain the water first.
I'm actually thinking of this setup that way my system is
"tamper proof" when the timer is off. The downside of this is that I will have to go to the basement and manually turning the system on if I have to do some testing...

Thanks for your feedback :)

Wednesday, June 14th 2006, 9:04am

by HooKooDooKu

I believe that most valves don't care how they are oriented since they are working off electricity (selinoid) and water pressure.

Tuesday, June 13th 2006, 3:36pm

by Wet_Boots

Where is the backflow preventer? You would be better off installing a master valve outside. That way, the system can be manually operated without needing to go into the house.

Also, the valve can be serviced without water pouring out of it into your basement.

Tuesday, June 13th 2006, 10:38am

by savtong

Installing a master control valve

Hi, I'm planning to install a master control valve in the basement just before the main goes out of the basement wall.
My question is, would there be any problem installing the valve vertically as oppose to horizontally? I'm planning to install the
Hunter HPV-100 valve in a vertical position.