You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4401 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Saturday, June 3rd 2006, 7:34pm

by IWillDare

I read that the Hunter PGP-ATR is designed to fit in the MaxiPaw canister but that it is "compatible with many common impact canisters". Does anyone know if that would include the Orbit Satellite? I've got a couple of the Satellite impact heads that always full of dirt and would like to replace with the PGP-ATR if possible (to minimize digging!)

Monday, May 15th 2006, 6:13am

by Wet_Boots

Do yourself a favor, and just try one replacement at first. That way you won't waste money if it turns out that your particular system requires the low-pressure coverage that only the Maxipaw will provide.

Thursday, May 11th 2006, 12:38pm

by Tom

the pgp-atr will replace the guts of the maxipaw so you'll have a pgp rotor inside a maxipaw body. You'll also need a maxipaw wrench to take out the maxipaw guts. In my opinion, your better off changing to the pgp.

Thursday, May 11th 2006, 9:23am

by vlesperance1

PGP vs PGP-ATR vs MaxiPaw 2045

Everything I know about sprinklers, I've learned in the last 24 hours.

I have a new house with an old system (12+ years?) with 20ish Rain Bird MaxiPaw 2045's. Half the heads won't rotate properly.

Hunter PGP's seem like a good replacement. But I see something called PGP-ATR specifically to replace MaxiPaws. Is there a reason to pick PGP-ATR over PGP? Do they connect to the current piping differently? What really is the difference between the two?

Thanks in advance!