Reply
Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.
Attention: The last reply to this post was 4342 days ago. The thread may already be out of date. Please consider creating a new thread.
The last 8 posts
So I have Multi-Outlet Emitters that come up off the main line using thin tubing. I need to locate the mainline underground, add an emitter and have the thin tubing come off the emitter up above the ground...great, more digging!
This is a diagram of what you were explaining which is different than what I have. I'm guessing the only difference is that mine is subterrainian and has the tubing coming off of the main line up above to the surface.
http://www.google.com/search?hs=Suy&hl=en&lr=&client=firefox-a&rls=org.mozilla%3Aen-US%3Aofficial&q=%22drip+irrigation%22&btnG=Search
Okay, so where are the emitters located? Underground? At the valve control (we have rain bird valves)?
Thanks again, we'll get through this sooner or later!
True drip irrigation has emitters. Emitters are what allow only a tiny flow of water to pass through them. Once that flow is controlled, it goes straight to the plant. No tee fittings, to try to split the flow. Whatever you have (12 times over) that feeds one plant, you need a 13th. Usually, that consists of an emitter, and some tubing, and often a cap on the end of the tubing, to keep insects out.
Okay after a few minutes looking at emitters online, correct me if I'm wrong, the emitter is the end piece of the drip line that dispenses the water. Is that correct? My current drip system does not have emitters, it is only 1/4" tube with an open end that releases the water.
Wet_Boots, thanks for the reply. I'm not educated enough about the design/layout of the drip line system either so I have another question for you.
Where are the emitters located? How many emitters are supported on each valve?
Thanks again and sorry to bore you with these simple questions.[

]
Each water outlet requires its own emitter.
Drip System Question
We bought our house with a drip system installed which services about 12 lines to existing plants. Everything is in working order.
We added a plant next to an existing plant that had its own drip line. I added a barbed Tee connector to split the existing drip line so that the new plant would have a line as well. My problem is that it appears the water is only coming through one or the other split line, but not both at the same time. Is there a way I can get the water to flow through each of these at a equal rate? Will increasing water pressure at the Rainbird valve help (is it possible to increase water pressure??)?
Thanks for the help!