You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4400 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Wednesday, May 31st 2006, 4:34pm

by savtong

I will try this once I got my rain-tree order from the mail.
My sprinkler is already up and running and I plan to change the nozzle without removing the rotors.


Wednesday, May 31st 2006, 10:25am

by brad44

Real easy. First make sure the radius reduction screw is completely clear of the nozzle. Next, lift and hold up the stem. With a flat head screw driver you should be able to easily remove the nozzle. I think there's a slot on the bottom of the nozzle.

Wednesday, May 31st 2006, 9:59am

by savtong

42SA nozzle replacement

I just bought several 42SA RB rotors. They all came pre-configured with 3gpm spray nozzles. I need to change 4 corner rotors with 1.5 gpm. I already bought a rain-tree for the 42SA's.

Anybody knows how I can do this/replace the nozzles while not damaging the rotors?

Thanks [:)]