You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4535 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Thursday, May 18th 2006, 5:47am

by jlease

Don't know if anything like that exists. Put in a main valve so that water loss is limited to the system run time. Finding leaks isn't usually all that difficult there's the water, there's the leak (give or take a few feet). I've been repairing systems for seven years now and just last month have my first case of here's the water, where's the leak?

Keep the rocks out of the backfill and don't trench too close to any trees (the roots will play havoc in the long run), use a good glue (Turftite) and primer.

Wednesday, May 17th 2006, 12:07pm

by dennyboy34

Leak Detection?

Getting ready to install a new residential underground lawn sprinkler system that hopefully will last many years (PVC and/or poly pipe). But nothing lasts forever. Keeping in mind how difficult is it to pinpoint the exact location of a pipe/tube leak in a main or lateral line or fitting, any suggestions on designing in a automatic leak detection system? Probably would be someting electronic, alarming when a leak occurs and providing location.