You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3088 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 7 posts

Wednesday, May 17th 2006, 11:17pm

by Wet_Boots

A following question would be why are you not paying somoene this time, then. You can try to manually open one valve at a time (with the system running) to determine which is the stuck valve.

Wednesday, May 17th 2006, 7:09pm

by tpdun

Here is the dumb question...I don't see any differences when running. Am I supposed to take it apart to view any differences? this is why I pay someone to do this stuff...
Thanks

Tuesday, May 16th 2006, 5:33pm

by tpdun

I'll give it a shot...thanks!

Tuesday, May 16th 2006, 5:11pm

by Wet_Boots

Remember the Sesame Street song? "One of these things is not like the other" ~ Check them visually. Go and buy a brand new valve of the identical make and model, so you can see how it goes together and comes apart. (and to supply you with any parts you need)

Search this forum with your valve name, and you will probably find a thread or two all about it.

Tuesday, May 16th 2006, 4:58pm

by tpdun

What is the next step to confirm that a valve is stuck open and what do I do if confirmed? Thanks for the reply.

Tuesday, May 16th 2006, 2:02pm

by Wet_Boots

One valve in the back is mechanically stuck open.

Tuesday, May 16th 2006, 12:49pm

by tpdun

Master Valve wiring

Our back sprinklers were installed with their own box in the back connected to a "master valve" in the front (this one in front is wired to the MV connection at the timer). When I turn on any one of the 9 zones around our home from the timer box, one valve in back is always on due to this MV connection; if I disconnect it, the back sprnklers do not turn on at all. In order to turn the back on manually, I must turn on this master valve in front and then go in back and turn on the others from there, but the one valve always stays on. The landscapers who installed this are no longer available to me and our current guy cannot understand why an actual sprinkler zone even turns on when the master is activated from either the timer or the box itself...any ideas? Thanks