You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3823 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Thursday, June 3rd 2004, 9:54pm

by BIGC

1 inch copper from 1 inch meter approximately 35' long feeding into the psi robbing 825YA RPZ and onto the hunter 1" hpv valves which are about 4-5 feet from the rpz

Thursday, June 3rd 2004, 3:19pm

by Tom

you'll gain 8 psi going with 1.25" as opposed to 1" poly.

what is the size and length of your mainline?

Thursday, June 3rd 2004, 4:42am

by aquamatic

You miught want to consider a booster pump to gain the pressure you need.

Wednesday, June 2nd 2004, 11:48pm

by BIGC

1 1/4" poly pipe

Can someone please tell me if I will have a problem with running 11/4 inch polypipe from my valves to my sprinklers, I don't have a lot of pressure and I am trying to minimize the psi loss, my longest run is 220 feet,@ 14gpm, some bozo in Illinois said I have to have a psi robbing RPZ(Febco 825YA) thanks for the help