You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4368 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Friday, May 5th 2006, 2:23pm

by Wet_Boots

Return it as defective.

Friday, May 5th 2006, 6:10am

by Heaviside

PGJ Won't Rotate!

I have a PGJ head set for 180 degree rotation. Stream flow seems normal, but when it nears the leftmost trip point it hangs up and stops rotating. When I manually move it to the left trip point, it will then reverse and go through a complete arc---until it almost gets to the left trip point, where it hangs up again. Red nozzle, about 30 psi. Any ideas what's causing the problem? Thanks.