You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 5140 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Thursday, May 27th 2004, 5:19pm

by hjc13

That sounds great! Thank you for your quick response. Do you know of any links that have some good descriptive pictures?

Thursday, May 27th 2004, 11:24am

by aquamatic

If you get a deep box you canrun it through the holes. For residential we mainly use the shallow 12" which just sit ontop of the piping, then we throw in a small layer of 3/4 crushed stone

Thursday, May 27th 2004, 10:48am

by hjc13

Valve Box Install

Sorry if this is a really basic question. I've been reading about setting up the valve box with rocks and mesh but, when you're installing the valve box, does the incoming copper pipe go through the hole in the side of box or underneath? And the pipe after the valves going to the heads, do they go down through the rocks and underneath the box and then out? I'm looking to do the valve box install this weekend. Does anyone have or can they point me to a good diagram? Thanks in advance for your help.

PS, This forum is excellent!!