You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4619 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Monday, April 24th 2006, 4:29pm

by luis

Check the resistance and I found out that my ground was not correct. My rain sensor was not working properly and was not hooked up to the rain sensor bypass.

All is working now!

Thanks for your help![8D]

Monday, April 24th 2006, 3:19am

by Wet_Boots

Now check the wiring. Test for resistance.

Sunday, April 23rd 2006, 3:48pm

by luis

System won't work with timer!

I have just turned on my system; all sprinklers work using the manual control at the valves.

I tried using my Rainbird system and nothing happens.

I have measure the voltage on one station and it read 29 v but I checked the voltage on the other stations and they also read 29 v when I only have station one on. And my system still does not work.

I have tried manual test, and by passed the sensor.

Please help I just bought the home and I may be missing something with my inherited sprinkler system.