You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2922 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 6 posts

Monday, April 24th 2006, 1:21pm

by zenavttmn

Thanks for the advice. Just ordered a new Weathermatic WMPLUS6--hope this fixes the problem---I'm sure it will all other components are functioning correctly.

Sunday, April 23rd 2006, 2:31pm

by RidgeRun05

Your best bet is to replace the controller with a quality one. You will spend just as much fixing this one, as you would on a decent new one. Stick with a quality name brand.

Sunday, April 23rd 2006, 7:57am

by Wet_Boots

A new controller would be the simple way out. Diagnosing solid-state controller problems (beyond the obvious reboot/reset stuff) is a waste of time.

Sunday, April 23rd 2006, 7:34am

by zenavttmn

I tried the reboot---even used the reset on the system--still the same. Any other ideas?

Saturday, April 22nd 2006, 12:05pm

by Wet_Boots

Reboot. Pull the plug, and remove any backup batteries.

Saturday, April 22nd 2006, 9:25am

by zenavttmn

Weathermatic controller that won't turn off

I have a weathermatic controller and it now runs the system programs regardless of the fact that the valve power control is in the <b></b><b><b>off</b></b> position. It will run in automatic and manual mode in the off position. Is it time for a new controller and if so what recomendations can anyone make? I only have 6 zones and it is mounted indoors. I have replaced the pump starter solonoid.