You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3114 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 10 posts

Friday, March 24th 2006, 1:56am

by SprinklerGuy

:)

Thursday, March 23rd 2006, 6:27pm

by lush96

for a bush business it does.

Thursday, March 23rd 2006, 3:40am

by Tom

i should have taken your approach sprinkler guy..............

Thursday, March 23rd 2006, 3:18am

by SprinklerGuy

Lush..you will not suck me into a pissing match..

My business does just fine thanks for worrying about me.....


Wednesday, March 22nd 2006, 8:04pm

by lush96

and you guys are bush and will keep wasting your time going back to one customers house until it works instead of just doing it right the first time. shame on you guys. remember namod, you get what you pay for. bush........or professionals. repair techs are the real thinkers and true craftsman. sprinklerguy even admitted this. he will just keep trying and trying till something works. how do you stay in business.

Wednesday, March 22nd 2006, 7:30am

by Tom

right on sprinklerguy! my sentiments exactly!

and the guy will have the added bonus of learning how the valve works and what could go wrong with it!


Wednesday, March 22nd 2006, 6:19am

by SprinklerGuy

WTF? gutting is considered dirty and unprofessional?

I think replacing something at a higher cost, when rebuilding it at a lower cost to the client will be fine, is unprofessional. Most of the new irrigators coming up are not repair techs...they are replace techs.

Gone are the days when troubleshooting was a necessity...new guys just start replacing stuff until it works. Sheesh.

You cannot compare a remote control irrigation valve with an oil filter....they sell replacement parts for a reason...I have yet to see a replacement part for an oil filter...

Your posts are amusing Lush..keep it up.

Sunday, March 19th 2006, 8:02pm

by lush96

"gutting" valves is tricky and the body of the valve CAN contain a rock or debris. the new style "irritrol" valves can be just a slight bit different than the older ones. even though it seems to fit.....it just doesnt work!!!! i only "gut" valves when it is almost impossible to change the whole thing. nothing can compare to replacing the whole valve. gutting valves in the irrigation industry unless absolutely neccessary is considered a dirty and unprofessional way of doing it. get your hands a little dirty and do it the right way!!!!!! it may take a little longer but you will not have any problems. when your cars oil filter is bad........do you just rinse it and put it back or do you get a new one.

Tuesday, November 29th 2005, 11:39am

by RidgeRun05

Sounds to me like the diaphragm might be shot. If you have already replaced the solenoid, and you are sure the wiring is correct, then troubleshoot the internals of the valve next. Shut off the water and remove the top of the valve. Pull the diaghragm and inspect for any excessive wear or damage. Clean out the valve, and replace with a new diaphragm if necessary. It could just be debris in the valve. You shouldn't have to replace the entire valve, very rarely do the bodies of valves go bad.

Tuesday, October 25th 2005, 2:56pm

by namodnom

Richdel 204AT

One of my zone stations (drip) will not shut down after the timer shuts off. I have replaced the solinoid to no avail. I have to turn the water off to stop it. Should I replace the whole valve or try a new diafram?. I unscrew the solinoid and water continues up thru the stem. Help.