You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3139 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 5 posts

Sunday, March 19th 2006, 5:45pm

by lush96

radical hit it on the nose. use the tracer and when you lose the signal thats where the valves are. unless the wire continues to another valve location. in that case it gets difficult. always put a valve box over your valves and if buried properly, you will nevr have this problem.

Sunday, March 5th 2006, 8:53am

by radical

If you are just doing this once, you might want to rent a wire locator from a local Irrigation Supply House. The clicker does work but I have a Progressive Electronics 521 Wire locator and
have found valves on the beach lost from Hurricanes. This is the type they usually rent. You just start at the Controller and follow the dead spot between the two tones. As far as the wires, make sure they have a wire spice on them, but don't bury them in the valve box.

Saturday, January 14th 2006, 1:31pm

by DavKar409

I called an installer but I was looking for a way to learn about the valve location process. I did not know if the buzzing device was worth the retail price and I wanted to check with the experts before I made a purchase.

Would it be better to leave connected valve wires laying visible in a valve box or to bury the wires for the best protection?

Saturday, January 14th 2006, 12:11pm

by SprinklerGuy

It is a reliable way to find valves...it does help to be a sprinkler tech using this method as we have a pretty good idea of where the valves should be to begin with.

I recommend hiring a sprinkler tech to come out and find the valves....I charge from 75-100 to find valves....if that isn't feasible you could buy a device like what you are talking about...for about 75 dollars....

If you need a recommendation of who to call....tell us where you are, many of us know other techs from around the country and could help you find some help.

Good luck.

Saturday, January 14th 2006, 5:50am

by DavKar409

Lost Valves

I am trying to locate two lost valves in the yard. I have read about a device that either buzzes or clicks the solenoid when attached to the controller. You go into the yard and listen for the sound. Will this thing actually work well enough to find a hidden valve?
If this location method is unreliable, what can a homeowner do to find a missing valve?

I am also replacing a valve that has the solenoid wires buried? Would it be better to make the new connections so that they are visible in the valve box or bury them again?