You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4486 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Tuesday, March 7th 2006, 4:34am

by HooKooDooKu

1. I believe the unified plumbing code does not allow for PVC under constant pressure above ground.
2. Again, I think the upc indicates a minimum of 18"
3. With PVB, it's not the height above the ground that matters but height (6" I think) above the highest sprinkler. So if you live on level ground, 1 foot should be sufficient. But if you live on a hill, the PVB needs to be at the top of the hill and then 6"-12" higher.

Monday, March 6th 2006, 5:02pm

by johnmaag

Texas Codes for Back flow Installation

Just bought a Febco PVB 1 1/2". I will likely need a plumber to install but wanted to see if anyone knows the codes in Texas for installation.

1. Can PVC be used for connection of the Backflow Valve.

2. What is the depth the supply line needs to be installed

3. What height does the Backflow need to be installed above the ground? 1 foot?